常用紧固件国标对照表
• 1型六角螺母 GB/T 6170-2000
• 六角薄螺母 GB/T 6172.1-2000
• 盖形螺母 GB/T 923-88
• 标准型弹簧垫圈 GB/T 93-87
• 内六角沉头螺钉 GB/T 70.3-2000
• 内六角平圆头螺钉 GB/T 70.2-2000
• 内六角圆柱头螺钉 GB/T 70.1-2000
• 内六角凹端紧定螺钉 GB/T 80-2000
• 平垫圈 A级 GB/T 97.1-2002
• 钢结构用高强度垫圈 GB/T 1230-91
• 钢结构用高强度大六角头螺母 GB/T 1229-91
• 钢结构用高强度大六角头螺栓 GB/T 1228-91
• 大半圆头方颈螺栓 C级 GB/T 14-1998
• 半圆头方颈螺栓 GB/T 12-88
• 十字槽小盘头螺钉 GB/T 823-88
• 等长双头螺柱 B级 GB/T 901-88
• 十字槽沉头螺钉 第1部分：钢4.8级 GB/T 819.1-2000
• 十字槽盘头螺钉 GB/T 818-2000
• 开口型扁圆头抽芯铆钉 GB/T 12618-90
• 圆柱销 不淬硬钢和奥氏体不锈钢 GB/T 119.1-2000
• 十字槽沉头自攻螺钉 GB/T 846-85
• 十字槽盘头自攻螺钉 GB/T 845-85
• 小垫圈 A级 GB/T 848-2002
• 大垫圈 A级 GB/T 96.1-2002
• 六角头螺栓 GB/T 5782-2000
• 六角头螺栓 全螺纹 GB/T 5783-2000
所有GB标准
螺栓
• 方头螺栓 C级 Square head bolts-Product grade C
GB/T 8-88 | UDC 621.882.6 | 代替GB8-76
• 沉头方颈螺栓 Flat countersunk square neck bolts
GB/T 10-88 | UDC 621.882.6 | 代替GB10-76
• 沉头带榫螺拴 Flat countersunk nib bolts
GB/T 11-88 | UDC 621.882.6 | 代替GB11-76
• 半圆头方颈螺栓 Cup head square neck bolts
GB/T 12-88 | UDC 621.882.6 | 代替GB12-76
• 半圆头带榫螺栓 Cup head nid bolts
GB/T 13-88 | UDC 621.882.6 | 代替GB13-76
• 大半圆头方颈螺栓 C级 Cup head square neck bolts with large head-Product grade C
GB/T 14-1998 | 代替GB14-88
• 大半圆头带榫螺栓 Cup head nib bolts with large head
GB/T 15-88 | UDC 621.882.6 | 代替GB15-76
• 六角头铰制孔用螺栓 Hexagon fit bolts-product grade A and B
GB/T 27-88 | UDC 621.882.6 | 代替GB27-76
• 六角头螺杆带孔铰制孔用螺栓 Hexagon fit bolts with split pin hole on shank-product grade A and B
GB/T 28-88 | UDC 621.882.6 | 代替GB28-76
• 六角头头部带槽螺栓 A 和 B 级 Hexagon bolts with slot on head -product A and B
GB/T 29.1-88 | UDC 621.882.6 | 代替GB29-76
• 十字槽凹穴六角头螺栓 Cross recessed hexagon bolts with indentation
GB/T 29.2-88 | UDC 621.882.6 | 代替GB29-76
• 下方头螺栓 B级 Square head bolts with small head-praduct grade B
GB/T 35-88 | UDC 621.882.6 | 代替GB35-76
• T 形槽用螺栓 Bolts for T-Slot
GB/T 37-88 | UDC 621.882.6 | 代替GB37-76
• 加强半圆头方颈螺栓 Strengthened cup head square neck bolts
GB/T 794-93 | 代替GB794-67
• 六角头螺杆带孔螺栓 Hexagon bolts with split pin hole on shank-product grade A and B
GB/T 31.1-88 | UDC 621.882.6 | 代替GB31、23、24-76
• 六角头螺杆带孔螺栓 细杆 B级 Hexagon bolts with split pin hole on shank-Reduced shank-product grade B
GB/T 31.2-88 | UDC 621.882.6 | 代替GB31、23、24-76
• 六角头螺杆带孔螺栓 细牙 A和B级 Hexagon bolts with split pin hole on shank-Fine pitch thread-product grade A and B
GB/T 31.3-88 | UDC 621.882.6 | 代替GB31、23、24-76
• 六角头头部带孔螺栓 A 和 B级 Hexagon bolts with wire holes on head-product grade A and B
GB/T 32.1-88 | UDC 621.882.6 | 代替GB32、25、26-76
• 六角头头部带孔螺栓 细杆 B级 Hexagon bolts with wire holes on head-Reduced shank-product grade B
GB/T 32.2-88 | UDC 621.882.6 | 代替GB32、25、26-76
• 六角头头部带孔螺栓 细牙 A 和 B 级 Hexagon bolts with wire holes on head-Fine pitch thread-product grade A and B
GB/T 32.3-88 | UDC 621.882.6 | 代替GB32、25、26-76
• 活节螺栓 Eye bolts
GB/T 798-88 | UDC 621.882.6 | 代替GB798-76
• 地脚螺栓 Eyelet bolts
GB/T 799-88 | UDC 621.882.6 | 代替GB799-76
• 沉头双榫螺 Flat countersunk double nib bolts
GB/T 800-88 | UDC 621.882.6 | 代替GB800-77
• 小半圆头低方颈螺栓 B级 Cup head square neck bolts with small head and short neck-product grade B
GB/T 801-1998 | 代替GB801-88
• 六角头螺栓 C级 Hexagon head bolts-product grade C
GB/T 5780-2000 | 代替GB/T 5780-1986
• 六角头螺栓 全螺纹 C级 Hexagon head bolts-Full thread-product grade C
GB/T 5781-2000 | 代替GB/T 5781-1986
• 六角头螺栓 Hexagon head bolts
GB/T 5782-2000 | 代替GB/T 5782-1986
• 六角头螺栓 全螺纹 Hexagon head bolts-Full thread
GB/T 5783-2000 | 代替GB/T 5783-1986
• 六角头螺栓-细杆-B级 Hexagon head bolts-Reduced shank -Product grade B
GB/T 5784-86 | UDC 621.882.6 | 代替GB30、21-76
• 六角头螺栓 细牙 Hexagon head bolts with fine pitch thread
GB/T 5785-2000 | 代替GB/T 5785-1986
• 六角头螺栓 细牙 全螺纹 Hexagon head bolts with fine pitch thread-Full thread
GB/T 5786-2000 | 代替GB/T 5786-1986
• 六角法兰面螺栓-加大系列-B级 Hexagon flange bolts-Heavy series-product grade B
GB/T 5789-86 | UDC 621.882.6
• 六角法兰面螺栓-加大系列-细杆-B级 Hexagon flange bolts-Heavy series-product grade B
GB/T 5790-86 | UDC 621.882.6
• 六角法兰面螺栓 小系列 Hexagon flange bolts-Small series
GB/T 16674-1996 | 代替GB/T 5787、5788-1986
• 钢网架螺栓球节点用高强度螺栓 High strength bolts for joints of space grid structures
GB/T 16939-1997
螺钉
• 开槽凹端紧定螺钉 Slotted set screws with cup point
GB/T 74-85 | UDC 621.882.219.4.092.6 | 代替GB74-76
• 方头长圆柱端紧定螺钉 Square set screws with long dog point
GB/T 85-88 | UDC 621.882.2 | 代替GB85-76
• 十字槽半沉头螺钉 Countersunk raised head screws (common head style) with cross recess
GB/T 820-2000 | 代替GB/T 820-1985
• 开槽圆柱端定位螺钉 Slotted setscrews with dog point
GB/T 829-88 | UDC 621.882.2 | 代替GB829-76
• 开槽大圆柱头螺钉 Slotted large cheese head screws
GB/T 833-88 | UDC 621.882.2 | 代替GB833-76
• 六角头不脱出螺钉 Hexagon screws with waisted shank
GB/T 838-88 | UDC 621.882.2 | 代替GB838-76
• 滚花高头螺钉 Knurled thumb screws
GB/T 834-88 | UDC 621.882.2 | 代替GB834-76
• 滚花平头螺钉 Knurled screws
GB/T 835-88 | UDC 621.882.2 | 代替GB835-76
• 滚花小头螺钉 Knurled screws with small head
GB/T 836-88 | UDC 621.882.2 | 代替GB836-76
• 开槽盘头不脱出螺钉 Slotted pan head screws with waisted shank
GB/T 837-88 | UDC 621.882.2 | 代替GB837-76
• 方头短圆柱锥端紧定螺钉 Square set screws with short dog point and cone end
GB/T 86-88 | UDC 621.882.2 | 代替GB86-76
• 十字槽盘头螺钉 Pan head screws with cross recess
GB/T 818-2000 | 代替GB/T 818-1985
• 十字槽沉头螺钉 第1部分：钢4.8级 Countersunk flat head screws (common head style)with cross recess-Part 1:Steel of property class 4.8
GB/T 819.1-2000 | 代替GB/T 819-1985
• 十字槽沉头螺钉 第2部分：钢8.8、不锈钢A2-70和有色金属CU2或CU3 Cross recessed countersunk flat head screws (common head style)-Grade A-Part 2:Steel of property class 8.8, stainless and non-ferrous metals
GB/T 819.2-1997
• 方头平端紧定螺钉 Square set screws with chamfered end
GB/T 821-88 | UDC 621.882.2 | 代替GB821-76
• 十字槽圆柱头螺钉 Cheese head screws with cross recess
GB/T 822-2000 | 代替GB/T 822-1988
• 十字槽小盘头螺钉 Cross recessed small pan head screws
GB/T 823-88 | UDC 621.882.2 | 代替GB823-76
• 吊环螺钉 Eyebolts
GB/T 825-88 | UDC 621.882 | 代替GB825-76
• 精密机械用紧固件十字槽螺钉 Fasteners for mechanics-Cross recessed screws
GB/T 13806.1-92
• 方头凹端紧定螺钉 Square set screws with cup point
GB/T 84-88 | UDC 621.882.2 | 代替GB84-76
• 开槽盘头定位螺钉 Slotted pan head set setscrews with dog point
GB/T 828-88 | UDC 621.882.2 | 代替GB828-76
• 滚花头不脱出螺钉 Knurled thumb screws with waisted shank
GB/T 839-88 | UDC 621.882.2 | 代替GB839-76
• 塑料滚花头螺钉 Plastic diamond knurlhead screws
GB/T 840-88 | UDC 621.882.2 | 代替GB840-79
• 开槽球面圆柱头轴位螺钉 Slotted raised head with shoulder
GB/T 946-88 | UDC 621.882.2 | 代替GB946-76
• 开槽球面大圆柱头螺钉 Slotted large raised cheese head screws
GB/T 947-88 | UDC 621.882.2 | 代替GB947-76
• 开槽沉头不脱出螺钉 Slotted countersunk head screws with waisted shank
GB/T 948-88 | UDC 621.882.2 | 代替GB948-76
• 开槽半沉头不脱出螺钉 Slotted raised countersunk head screws with waisted shank
GB/T 949-88 | UDC 621.882.2 | 代替GB949-76
• 开槽长圆柱端紧定螺钉 Slotted set screws with long dog point
GB/T 75-85 | UDC 621.882.219.4.092.5 | 代替GB75-76
• 方头长圆柱球面端紧定螺钉 Square set screws with long dog point and rounded end
GB/T 83-88 | UDC 621.882.2 | 代替GB83-76
• 开槽圆柱头轴位螺钉 Slotted cheese head screws with shoulder
GB/T 830-88 | UDC 621.882.2 | 代替GB830-76
• 开槽无头轴位螺钉 Slotted shoulder screws
GB/T 831-88 | UDC 621.882.2 | 代替GB831-76
• 开槽带孔球面圆柱头螺钉 Slotted capstan screws
GB/T 832-88 | UDC 621.882.2 | 代替GB832-76
• 开槽圆柱头螺钉 Slotted cheese head screws
GB/T 65-2000 | 代替GB/T 65-1985
• 开槽盘头螺钉 Slotted pan head screws
GB/T 67-2000 | 代替GB/T 67-1985
• 开槽沉头螺钉 Slotted countersunk flat head screws (common head style)
GB/T 68-2000 | 代替GB/T 68-1985
• 开槽半沉头螺钉 Countersunk slotted raised head screws (common head style)
GB/T 69-2000 | 代替GB/T 69-1985
• 开槽锥端紧定螺钉 Slotted set screws with cone point
GB/T 71-85 | UDC 621.882.219 | 代替GB71-76
• 开槽锥端定位螺钉 Slotted setscrews with cone point
GB/T 72-88 | UDC 621.882.2 | 代替GB72-76
• 开槽平端紧定螺钉 Slotted set screws with flat point
GB/T 73-85 | UDC 621.882.219.4 | 代替GB73-76
内六角螺钉
• 内六角花形盘头螺钉 Hexagon lobular socket pan head screws
GB/T 2672-86 | UDC 621.882.2 | 代替GB2672-81
• 内六角圆柱头轴肩螺钉 Hexagon socket head shoulder screws
GB/T 5281-85 | UDC 621.882.215.6
• 内六角花形沉头螺钉 Hexagon lobular socket countersunk head screws
GB/T 2673-86 | UDC 621.882.2 | 代替GB2673-81
• 内六角花形半沉头螺钉 Hexagon lobular socket raised countersunk head screws
GB/T 2674-86 | UDC 621.882.2 | 代替GB2674-81
• 内六角花形圆柱头螺钉-4.8级 Hexagon lobular socket head cap screws-property class 4.8
GB/T 6190-86 | UDC 621.882.2 | 代替GB2671-81
• 内六角花形圆柱头螺钉-8.8和10.9级 Hexagon lobular socket head cap screws-property class 8.8 and 10.9
GB/T 6191-86 | UDC 621.882.2 | 代替GB2671-81
• 内六角平端紧定螺钉 Hexagon socket set screws with flat point
GB/T 77-2000 | 代替GB/T 77-1985
• 内六角锥端紧定螺钉 Hexagon socket set screws with cone point
GB/T 78-2000 | 代替GB/T 78-1985
• 内六角圆柱端紧定螺钉 Hexagon socket set screws with dog point
GB/T 79-2000 | 代替GB/T 79-1985
• 内六角凹端紧定螺钉 Hexagon socket set screws with cup point
GB/T 80-2000 | 代替GB/T 80-1985
• 内六角圆柱头螺钉 Hexagon socket head cap screws
GB/T 70.1-2000 | 代替GB/T 70-1985
• 内六角平圆头螺钉 Hexagon socket button head screws
GB/T 70.2-2000
• 内六角沉头螺钉 Hexagon socket countersunk head screws
GB/T 70.3-2000
自攻螺钉
• 十字槽半沉头自攻锁紧螺钉 Cross recessed raised countersunk head thread forming screws
GB/T 6562-86 | UDC 621.882
• 六角头自攻锁紧螺钉 Hexagon head thread forming screws
GB/T 6563-86 | UDC 621.882
• 内六角花形圆柱头自攻锁紧螺钉 Hexagon lobular socket thread forming screws
GB/T 6564-86 | UDC 621.882
• 十字槽盘头自攻螺钉 Cross recessed pan head tapping screws
GB/T 845-85 | UDC 621.882.216.5.082.8 | 代替GB845-76
• 十字槽沉头自攻螺钉 Cross recessed countersunk head tapping screws
GB/T 846-85 | UDC 621.882.216.5.082.8 | 代替GB846-76
• 十字槽半沉头自攻螺钉 Cross recessed raised countersunk head tapping screws
GB/T 847-85 | UDC 621.882.216.5.082.8 | 代替GB847-76
• 开槽盘头自攻螺钉 Slotted pan head tapping screws
GB/T 5282-85 | UDC 621.882.215.082.8
• 开槽沉头自攻螺钉 Slotted countersunkhead tapping screws
GB/T 5283-85 | UDC 621.882.215.082.8
• 开槽半沉头自攻螺钉 Slotted raised countersunkhead tapping screws
GB/T 5284-85 | UDC 621.882.215.082.8
• 六角头自攻螺钉 Hexagon head tapping screws
GB/T 5285-85 | UDC 621.882.215.082.8
• 十字槽盘头自攻锁紧螺钉 Cross recessed pan head thread forming screws
GB/T 6560-86 | UDC 621.882
• 十字槽沉头自攻锁紧螺钉 Cross recessed countersunk head thread forming screws
GB/T 6561-86 | UDC 621.882
• 十字槽头凹穴六角头自攻螺钉 Cross recessed hexagon head tapping screws with indentation
GB/T 9456-88 | UDC 621.882.2
• 精密机械用紧固件十字槽自攻螺钉 刮削端 Fasteners for fine mechanics-Cross recessed tapping screws-Scrape point
GB/T 13806.2-92
• 墙板自攻螺钉 Dry wall screws
GB/T 14210-93
• 十字槽盘头自钻自攻螺钉 Cross recessed pan head drilling screws with tapping screw thread
GB/T 15856.1-2002 | 代替GB/T 15856.1-1995
• 十字槽沉头自钻自攻螺钉 Cross recessed countersunk head drilling screws with tapping screw thread
GB/T 15856.2-2002 | 代替GB/T 15856.2-1995
• 十字槽半沉头自钻自攻螺钉 Cross recessed raised countersunk head drilling screws with tapping screw thread
GB/T 15856.3-2002 | 代替GB/T 15856.3-1995
• 六角法兰面自钻自攻螺钉 Hexagon flange drilling screws with tapping screw thread
GB/T 15856.4-2002 | 代替GB/T 15856.4-1995
• 六角凸缘自钻自攻螺钉 Hexagon washer head drilling screws with tapping screw thread
GB/T 15856.5-2002
• 六角凸缘自攻螺钉 Hexzgon head tapping screws with collar
GB/T 16824.1-1997
• 六角法兰面自攻螺钉 Hexagon flange head tapping screws
GB/T 16824.2-1997
木螺钉
• 开槽圆头木螺钉 Slotted round head wood screws
GB/T 99-86 | UDC 621.882.2 | 代替GB99-76
• 开槽沉头木螺钉 Slotted countersunk head wood screws
GB/T 100-86 | UDC 621.882.2 | 代替GB100-76
• 开槽半沉头木螺钉 Slotted raised countersunk head wood screws
GB/T 101-86 | UDC 621.882.2 | 代替GB101-76
• 六角头木螺钉 Hexagon head wood screws
GB/T 102-86 | UDC 621.882.2 | 代替GB102-76
• 十字槽圆头木螺钉 Cross recessed round head wood screws
GB/T 950-86 | UDC 621.882.2 | 代替GB950-76
• 十字槽沉头木螺钉 Cross recessed countersunk head wood screws
GB/T 951-86 | UDC 621.882.2 | 代替GB951-76
• 十字槽半沉头木螺钉 Cross recessed raised head countersunk head wood screws
GB/T 952-86 | UDC 621.882.2 | 代替GB952-76
螺杆和螺柱
• 储能焊用焊接螺柱 Weld studs for capacitor discharge welding
GB/T 902.3-89 | 代替GB902-76
• 等长双头螺柱 C级 Double end studs(clamping type)-product grade C
GB/T 953-88 | UDC 621.882 | 代替GB953-76
• 螺杆 Threaded rods
GB/T 15389-94
• 双头螺柱 bm=1d Double end studs-bm=1d
GB/T 897-88 | UDC 621.882 | 代替GB897-76
• 双头螺柱 bm=1.25d Double end studs-bm=1.25d
GB/T 898-88 | UDC 621.882 | 代替GB898-76
• 双头螺柱 bm=1.5d Double end studs-bm=1.5d
GB/T 899-88 | UDC 621.882 | 代替GB899-76
• 双头螺柱 bm=2d Double end studs--bm=2d
GB/T 900-88 | UDC 621.882 | 代替GB900-76
• 等长双头螺柱 B级 Double end studs(clamping type) -Product grade B
GB/T 901-88 | UDC 621.882 | 代替GB901-76
• 手工焊用焊接螺柱 Weld studs for manual welding
GB/T 902.1-89 | 代替GB902-76
• 机动弧焊用焊接螺柱 Weld studs for arc welding
GB/T 902.2-89 | 代替GB902-76
铆钉
• 平头铆钉 Flat head rivets
GB/T 109-86 | UDC 621.884 | 代替GB109-76
• 标牌铆钉 Rivets for name plate
GB/T 827-86 | UDC 621.884 | 代替GB827-76
• 半圆头铆钉(粗制) Round head rivets-Black
GB/T 863.1-86 | UDC 621.884 | 代替GB863-76
• 小半圆头铆钉(粗制) Round head rivets with small head-Black
GB/T 863.2-86 | UDC 621.884
• 平锥头铆钉(粗制) Cone head rivets-Black
GB/T 864-86 | UDC 621.884 | 代替GB864-76
• 沉头铆钉(粗制) Countersunk head rivets-Black
GB/T 865-86 | UDC 621.884 | 代替GB865-86
• 半沉头铆钉(粗制) Oval countersunk head rivets-Black
GB/T 866-86 | UDC 621.884 | 代替GB866-76
• 半圆头铆钉 Round head rivets
GB/T 867-86 | UDC 621.884 | 代替GB867-76
• 平锥头铆钉 Cone head rivets
GB/T 868-86 | UDC 621.884 | 代替GB868-76
• 沉头铆钉 Countersunk head rivets
GB/T 869-86 | UDC 621.884 | 代替GB869-76
• 半沉头铆钉 Oval countersunk head rivets
GB/T 870-86 | UDC 621.884 | 代替GB870-76
• 扁圆头铆钉 Flat round head rivets
GB/T 871-86 | UDC 621.884 | 代替GB871-76
• 扁平头铆钉 Thin head rivets
GB/T 872-86 | UDC 621.884 | 代替GB872-76
• 扁圆头半空心铆钉 Oval head semi-tubular rivets
GB/T 873-86 | UDC 621.884 | 代替GB873-76
• 120°沉头半空心铆钉 120 degree countersunk head semi-tubular rivets
GB/T 874-86 | UDC 621.884 | 代替GB874-76
• 扁平头半空心铆钉 Thin head semi-tubular rivets
GB/T 875-86 | UDC 621.884 | 代替GB875-76
• 空心铆钉 Tubular rivets
GB/T 876-86 | UDC 621.884 | 代替GB876-76
• 120°沉头铆钉 120 degree countersunk head rivets
GB/T 954-86 | UDC 621.884 | 代替GB954-76
• 管状铆钉 Pipe type rivets
GB/T 975-86 | UDC 621.884 | 代替GB975-76
• 大扁圆头铆钉 Truss head rivets
GB/T 1011-86 | UDC 621.884 | 代替GB1011-76
• 120°半沉头铆钉 120 degree oval countersunk rivets
GB/T 1012-86 | UDC 621.884 | 代替GB1012-76
• 平锥头半空心铆钉 Cone head semi-tubler rivets
GB/T 1013-86 | UDC 621.884 | 代替GB1013-76
• 大扁圆头半空心铆钉 Truss head semi-tublar rivets
GB/T 1014-86 | UDC 621.884 | 代替GB1014-76
• 沉头半空心铆钉 Countersunk head semi-tublar rivets
GB/T 1015-86 | UDC 621.884 | 代替GB1015-76
• 无头铆钉 Headless rivets
GB/T 1016-86 | UDC 621.884 | 代替GB1016-76
• 封闭型扁圆头抽芯铆钉 Mushroom head break mandrel closed end blind rivets
GB/T 12615-90
• 封闭型沉头抽芯铆钉 120 deg flush head break mandrel closed end blind rivets
GB/T 12616-90
• 开口型沉头抽芯铆钉 120 deg flush head break mandrel blind rivets
GB/T 12617-90
• 开口型扁圆头抽芯铆钉 Mushroom head break mandrel blind rivets
GB/T 12618-90
• 扁圆头击芯铆钉 Flat round head drive rivets
GB/T 15855.1-1995
• 沉头击芯铆钉 Countersunk head drive rivets
GB/T 15855.2-1995
螺母
• 全金属六角法兰面锁紧螺母 细牙 Prevailing torque type all-metal hexagon nuts with flange with fine pitch thread
GB/T 6187.2-2000
• 方螺母 C级 Square nuts-product grade C
GB/T 39-88 | UDC 621.882.3 | 代替GB39-76
• 六角螺母 C级 Hexagon nuts-product grade C
GB/T 41-2000 | 代替GB/T 41-1986
• 六角厚螺母 Hexagon thick nuts
GB/T 56-88 | 代替GB56-76
• 蝶形螺母 Wing nuts
GB/T 62-88 | UDC 621.882.3 | 代替GB62-76
• 环形螺母 Lifting nuts
GB/T 63-88 | UDC 621.882.3 | 代替GB63-76
• 组合式盖形螺母 Acorn nuts
GB/T 802-88 | UDC 621.882.3 | 代替GB802-76
• 球面六角螺母 Hexagon nuts with raised face
GB/T 804-88 | UDC 621.882.3 | 代替GB804-76
• 2型六角螺母 Hexagon nuts,style 2
GB/T 6175-2000 | 代替GB/T 6175-1986
• 2型六角螺母 细牙 Hexagon nuts,style 2,with fine pitch thread
GB/T 6176-2000 | 代替GB/T 6176-1986
• 六角法兰面螺母 Hexagon nuts with flange
GB/T 6177.1-2000 | 代替GB/T 6177-1986
• 六角法兰面螺母 细牙 Hexagon nuts with flange-fine pitch thread
GB/T 6177.2-2000
• 1型六角开槽螺母-A和B级 Hexagon slotted and castle nuts,style 1 -product grades A and B
GB/T 6178-86 | UDC 621.882.3 | 代替GB57~58-76
• 1型六角开槽螺母-C级 Hexagon slotted nuts,style 1 -product grade C
GB/T 6179-86 | UDC 621.882.3 | 代替GB57~58-76
• 2型六角开槽螺母-A和B级 Hexagon slotted and castle nuts,style 2 -Product grades A and B
GB/T 6180-86 | UDC 621.882.3
• 六角开槽薄螺母-A和B级 Hexagon thin slotted nuts-Product grades A and B
GB/T 6181-86 | UDC 621.882.3 | 代替GB59~60-76
• 2型非金属嵌件六角锁紧螺母 Prevailing torque type hexagon nuts(with non-metallic insert),style 2
GB/T 6182-2000 | 代替GB/T 6182-1986
• 非金属嵌件六角法兰面锁紧螺母 Prevailing torque type hexagon nuts with flange(with non-metallic insert)
GB/T 6183.1-2000 | 代替GB/T 6183-1986
• 非金属嵌件六角法兰面锁紧螺母 细牙 Prevailing torque type hexagon nuts with flange(with non-metallic insert)with fine pitch thread
GB/T 6183.2-2000
• 1型全金属六角锁紧螺母 Prevailing torque type all-metal hexagon nuts,style 1
GB/T 6184-2000 | 代替GB/T 6184-1986
• 2型全金属六角锁紧螺母 Prevailing torque type all-metal hexagon nuts,style 2
GB/T 6185.1-2000 | 代替GB/T 6185-1986
• 2型全金属六角锁紧螺母 细牙 Prevailing torque type all-metal hexagon nuts,style 2,with fine pitch thread
GB/T 6185.2-2000
• 2型全金属六角锁紧螺母 9级 Prevailing torque type all-metal hexagon nuts,style 2-Property class 9
GB/T 6186-2000 | 代替GB/T 6186-1986
• 全金属六角法兰面锁紧螺母 Prevailing torque type all-metal hexagon nuts with flange
GB/T 6187.1-2000 | 代替GB/T 6187-1986
• 扣紧螺母 Tight nuts
GB/T 805-88 | UDC 621.882.3 | 代替GB805-76
• 滚花高螺母 Knurled nut with collar
GB/T 806-88 | UDC 621.882.3 | 代替GB806-76
• 滚花薄螺母 Knurled nuts
GB/T 807-88 | UDC 621.882.3 | 代替GB807-76
• 小六角特扁细牙螺母 Small hexagon thin nuts-Fine pitch thread
GB/T 808-88 | UDC 621.882.3 | 代替GB808-76
• 嵌装圆螺母 Lnsert round nuts
GB/T 809-88 | UDC 621.882.3 | 代替GB809-76
• 小圆螺母 Small round nuts
GB/T 810-88 | UDC 621.882.3 | 代替GB810-76
• 圆螺母 Round nuts
GB/T 812-88 | UDC 621.882.3 | 代替GB812-76
• 端面带孔圆螺母 Round nuts with drilled holes in one face
GB/T 815-88 | UDC 621.882.3 | 代替GB815-76
• 侧面带孔圆螺母 Round nuts with set pin holes in side
GB/T 816-88 | UDC 621.882.3 | 代替GB816-79
• 带槽圆螺母 Slotted round nuts
GB/T 817-88 | UDC 621.882.3 | 代替GB817-76
• 1型非金属嵌件六角锁紧螺母 Prevailing torque type hexagon nuts(with non-metallic insert),style 1
GB/T 889.1-2000 | 代替GB/T 889-1986
• 1型六角开槽螺母 细牙 A和B级 Hexagon slotted and castle nuts,style 1-fine pitch thread-product grades A and B
GB/T 9457-88 | UDC 621.882.3 | 代替GB57、58-76
• 2型六角开槽螺母 细牙 A和B级 Hexagon slotted and castle nuts,style 2--Fine pitch thread -Product grades A and B
GB/T 9458-88 | UDC 621.882.3
• 六角开槽薄螺母 细牙 A和B级 Hexagon thin slotted nuts--Fine pitch thread -Product grades A and B
GB/T 9459-88 | UDC 621.882.3 | 代替GB59、60-76
• 焊接方螺母 Square weld nuts
GB/T 13680-92
• 焊接六角螺母 Hexagon weld nuts
GB/T 13681-92
• 平头铆螺母 Flat head riveted nuts
GB/T 17880.1-1999
• 沉头铆螺母 Countersunk head riveted nuts
GB/T 17880.2-1999
• 小沉头铆螺母 Small countersunk head riveted nuts
GB/T 17880.3-1999
• 120°小沉头铆螺母 120°Small countersunk head riveted nuts
GB/T 17880.4-1999
• 平头六角铆螺母 Flat head hexagon riveted nuts
GB/T 17880.5-1999
• 精密机械用六角螺母 Hexagon nuts for fine mechanics
GB/T 18195-2000
• 盖形螺母 Acorn nuts
GB/T 923-88 | UDC 621.882.3 | 代替GB923-76
• 1型非金属嵌件六角锁紧螺母 细牙 Prevailing torque type hexagon nuts(with non-metallic insert),style 1,with fine pitch thread
GB/T 889.2-2000
• 1型六角螺母 Hexagon nuts,style 1
GB/T 6170-2000 | 代替GB/T 6170-1986
• 1型六角螺母 细牙 Hexagon nuts,style 1,with fine pitch thread
GB/T 6171-2000 | 代替GB/T 6171-1986
• 六角薄螺母 Hexagon thin nuts(chamfered)
GB/T 6172.1-2000 | 代替GB/T 6172-1986
• 非金属嵌件六角锁紧薄螺母 Prevailing torque type hexagon thin nuts(with non-metallic insert)
GB/T 6072.2-2000
• 六角薄螺母 细牙 Hexagon thin nuts(chamfered) with fine pitch thread
GB/T 6173-2000 | 代替GB/T 6173-1986
• 六角薄螺母 无倒角 Hexagon thin nuts(unchamfered)
GB/T 6174-2000 | 代替GB/T 6174-1986
垫圈
• 大垫圈 A级 Plain washers-Large series-Product grade A
GB/T 96.1-2002 | 代替GB/T 96-1985
• 大垫圈 C级 Plain washers-Large series-Product grade C
GB/T 96.2-2002 | 代替GB/T 96-1985
• 平垫圈 倒角型 A级 Plain washers,chamfered-Product grade A
GB/T 97.2-2002 | 代替GB/T 97.2-1985
• 平垫圈 用于螺钉和垫圈组合件 Plain washers for screw and washer assemblies
GB/T 97.4-2002 | 代替GB/T 9074.24、9074.25-1988
• 球面垫圈 Washers with ball face
GB/T 849-88 | UDC 621.882.4 | 代替GB849-76
• 锥面垫圈 Washers with cone face
GB/T 850-88 | UDC 621.882.4 | 代替GB850-76
• 开口垫圈 Washers with split
GB/T 851-88 | UDC 621.882.4 | 代替GB851-76
• 平垫圈 用于自攻螺钉和垫圈组合件 Plain washers for tapping screw and washer assemblies
GB/T 97.5-2002 | 代替GB/T 9074.29、9074.30-1988
• 小垫圈 A级 Plain washers-small series-Product grade A
GB/T 848-2002 | 代替GB/T 848-1985
• 工字钢用方斜垫圈 Square taper washers for I section
GB/T 852-88 | UDC 621.882.4 | 代替GB852-76
• 槽钢用方斜垫圈 Square taper washers for slot section
GB/T 853-88 | UDC 621.882.4 | 代替GB853-76
• 单耳止动垫圈 Tab washers with long tab
GB/T 854-88 | UDC 621.882.4 | 代替GB854-76
• 双耳止动垫圈 Tab washers with long tab and wing
GB/T 855-88 | UDC 621.882.4 | 代替GB855-76
• 外舌止动垫圈 External tab washers
GB/T 856-88 | UDC 621.882.4 | 代替GB856-76
• 圆螺母用止动垫圈 Tab washers for round nut
GB/T 858-88 | UDC 621.882.4 | 代替GB858-76
• 轻型弹簧垫圈 Single coil spring lock washers,Light type
GB/T 859-87 | UDC 621.882.4 | 代替GB859-76
• 鞍形弹性垫圈 Curved spring washers
GB/T 860-87 | UDC 621.882.4 | 代替GB860-76
• 内齿锁紧垫圈 Lock washers internal teeth
GB/T 861.1-87 | UDC 621.882.4 | 代替GB861-76
• 内锯齿锁紧垫圈 Serrated lock washers internal teeth
GB/T 861.2-87 | UDC 621.882.4
• 外齿锁紧垫圈 Lock washers external teeth
GB/T 862.1-87 | UDC 621.882.4 | 代替GB862-76
• 外锯齿锁紧垫圈 Serrated lock washers external teeth
GB/T 862.2-87 | UDC 621.882.4
• 波形弹性垫圈 Wave spring washers
GB/T 955-87 | UDC 621.882.4 | 代替GB955-76
• 锥形锁紧垫圈 Countersunk external toothed lock washers
GB/T 956.1-87 | UDC 621.882.4 | 代替GB956-76
• 锥形锯齿锁紧垫圈 Countersunk Serrated external toothed lock washers
GB/T 956.2-87 | UDC 621.882.4
• 特大垫圈 C级 Plain washers-Extra large series-Product grade C
GB/T 5287-2002 | 代替GB/T 5287-1985
• 重型弹簧垫圈 Single coil spring lock washers,heavy type
GB/T 7244-87 | UDC 621.882.4
• 鞍形弹簧垫圈 Curved Single coil spring lock washers
GB/T 7245-87 | UDC 621.882.4
• 波形弹簧垫圈 Wave Single coil spring lock washers
GB/T 7246-87 | UDC 621.882.4
• 标准型弹簧垫圈 Single coil spring lock washers Normal type
GB/T 93-87 | UDC 621.882.4 | 代替GB93-76
• 平垫圈 C级 Plain washers-Product grade C
GB/T 95-2002 | 代替GB/T 95-1985
• 平垫圈 A级 Plain washers-Product grade A
GB/T 97.1-2002 | 代替GB/T 97.1-1985
• 销轴用平垫圈 Plain washers for clevis pins
GB/T 97.3-2000
挡圈
• 锥销锁紧挡圈 Lock rings with cone pin
GB/T 883-86 | UDC 621.885 | 代替GB883-76
• 螺钉锁紧挡圈 Lock ring with screw
GB/T 884-86 | UDC 621.885 | 代替GB884-76
• 带锁圈的螺钉锁紧挡圈 Lock rings with screw and circlip
GB/T 885-86 | UDC 621.885 | 代替GB885-76
• 轴肩挡圈 Rings for shoulder
GB/T 886-86 | UDC 621.885 | 代替GB886-76
• 螺钉紧固轴端挡圈 Lock rings at the end of shaft with screw
GB/T 891-86 | UDC 621.885 | 代替GB891-76
• 螺栓紧固轴端挡圈 Lock rings at the end of shaft with bolt
GB/T 892-86 | UDC 621.885 | 代替GB892-76
• 孔用弹性挡圈-A型 Circlips for holes-type A
GB/T 893.1-86 | UDC 621.885 | 代替GB893-76
• 孔用弹性挡圈-B型 Circlips for hole-type B
GB/T 893.2-86 | UDC 621.885
• 轴用弹性挡圈-A型 Circlips for shaft-type A
GB/T 894.1-86 | UDC 621.885 | 代替GB894-76
• 轴用弹性挡圈-B型 Circlips for shaft-type B
GB/T 894.2-86 | UDC 621.885
• 孔用钢丝挡圈 Roundwire snap rings for hole
GB/T 895.1-86 | UDC 621.885 | 代替GB895-76
• 轴用钢丝挡圈 Roundwire snap rings for shaft
GB/T 895.2-86 | UDC 621.885 | 代替GB895-76
• 开口挡圈 “E”rings
GB/T 896-86 | UDC 621.885 | 代替GB896-76
• 钢丝锁圈 Round wire circlips
GB/T 921-86 | UDC 621.885 | 代替GB921-76
• 夹紧挡圈 Grip rings
GB/T 960-86 | UDC 621.885 | 代替GB960-76
销及键
• 销轴 Clevis pins with head
GB/T 882-86 | UDC 621.886 | 代替GB882-76
• 开口销 Split pins
GB/T 91-2000 | 代替GB/T 91-1986
• 圆锥销 Taper pins
GB/T 117-2000 | 代替GB/T 117-1996
• 内螺纹圆锥销 Taper pins with internal thread
GB/T 118-2000 | 代替GB?T 118-1996
• 圆柱销 不淬硬钢和奥氏体不锈钢 Parallel pins,of unhardened steel and austenitic stainless steel
GB/T 119.1-2000 | 代替GB/T 119-1986
• 圆柱销 淬硬钢和马氏体不锈钢 Parallel pins,of hardened steel and martensitic stainless steel (Dowel pins)
GB/T 119.2-2000 | 代替GB/T 119-1986
• 开尾圆锥销 Taper pins with split
GB/T 877-76 | UDC 621.886 | 代替GB877-76
• 螺纹圆柱销 Parallel pins with external thread
GB/T 878-86 | UDC 621.886 | 代替GB878-76
• 带孔销 Pins with split pin hole
GB/T 880-86 | UDC 621.886 | 代替GB880-76
• 螺尾锥销 Taper pins with external thread
GB/T 881-2000 | 代替GB/T 881-1986
• 内螺纹圆柱销 不淬硬钢和奥氏体不锈钢 Parallel pins with internal thread, of unhardened steel and austenitic stainless steel
GB/T 120.1-2000 | 代替GB/T 120-1986
• 内螺纹圆柱销 淬硬钢和马氏体不锈钢 Parallel pins with internal thread,of hardened steel and martensitic stainless steel
GB/T 120.2-2000 | 代替GB/T 120-1986
• 弹性圆柱销 直槽 轻型 Spring-type straight pins-Slotted,light duty
GB/T 879.2-2000
• 弹性圆柱销 直槽 重型 Spring-type straight pins-Slotted, heavy duty
GB/T 879.1-2000 | 代替GB/T 879-1986
• 弹性圆柱销 卷制 重型 Spring-type straight pins-Coiled,heavy duty
GB/T 879.3-2000
• 弹性圆柱销 卷制 标准型 Spring-type straight pins-Coiled,standard duty
GB/T 879.4-2000
• 弹性圆柱销 卷制 轻型 Spring-type straight pins-Coiled,light duty
GB/T 879.5-2000
• 槽销 平行沟槽 Crooved pins-Parallel grooved
GB/T 13829.1-92
• 槽销 锥销 Crooved pins-taper grooved
GB/T 13829.2-92
• 槽销 圆头 沉头 Grooved pins-with round head or countersunk head
GB/T 13829.3-92
组合件和连接副
• 十字槽半沉头螺钉和锥形锁紧垫圈组合件 Cross recessed raised countersunk head screw and countersunk external toothed lock washer assemblies
GB/T 9074.10-88 | UDC 621.882
• 十字槽凹穴六角头螺栓和弹簧垫圈组合件 Cross recessed hexagon bolt with indetation single coil spring lock washer assemblies
GB/T 9074.12-88 | UDC 621.882
• 十字槽凹穴六角头螺栓、弹簧垫圈和平垫圈组合件 Cross recessed hexagon bolt with indetation,single coil lock washer and plain washer assemblies
GB/T 9074.13-88 | UDC 621.882
• 钢结构用高强度大六角头螺栓 High strength bolts with large hexagon head for steel structures
GB/T 1228-91 | 代替GB1228-84
• 钢结构用高强度大六角头螺母 High strength large hexagon nuts for steel structures
GB/T 1229-91 | 代替GB1229-84
• 钢结构用高强度垫圈 High strength plain washers for steel structures
GB/T 1230-91 | 代替GB1230-84
• 钢结构用扭剪型高强度螺栓连接副 Sets of torshear type high strength bolt hexagon nut and plain washer for steel structures
GB/T 3632-1995 | 代替GB3632-83
• 螺栓或螺钉和平垫圈组合件 Bolt or screw and washer assemblies with plain washers
GB/T 9074.1-2002 | 代替GB/T 9074.1、9074.14-1988
• 十字槽头螺钉和外锯齿锁紧垫圈组合件 Cross recessed pan head screw and serrated lock washer external teeth assemblies
GB/T 9074.2-88 | UDC 621.882
• 十字槽盘头螺钉和弹簧垫圈组合件 Cross recessed pan head screw and single coll spring lock washer assemblies
GB/T 9074.3-88 | UDC 621.882
• 十字槽盘头螺钉、弹簧垫圈和平垫圈组合件 Cross recessed pan head screw, single coil spring lock washer assemblies
GB/T 9074.4-88 | UDC 621.882
• 十字槽小盘头螺钉和平垫圈组合件 Cross recessed small pan head screw and small plain washer assemblies
GB/T 9074.5-88 | UDC 621.882
• 十字槽小盘头螺钉和大垫圈组合件 Cross recessed small pan head screw and big plain washer assemblies
GB/T 9074.6-88 | UDC 621.882
• 十字槽小盘头螺钉和弹簧垫圈组合件 Cross recessed small pan head screw and single coil spring lock washer assemblies
GB/T 9074.7-88 | UDC 621.882
• 十字槽小盘头螺钉、弹簧垫圈和平垫圈组合件 Cross recessed small pan head screw, single coil spring lock washer and plain washer assemblies
GB/T 9074.8-88 | UDC 621.882
• 十字槽沉头螺钉和锥形锁紧垫圈组合件 Cross recessed countersunk head screw and countersunk serrated external toothed lock washer assemblies
GB/T 9074.9-88 | UDC 621.882
• 十字槽凹穴六角头螺栓和平垫圈组合件 Cross recessed hexagon bolt with indentation and plain washer assemblies
GB/T 9074.11-88 | UDC 621.882
• 六角头螺栓和弹簧垫圈组合件 Hexagon head bolt and single coil spring lock washer assemblies
GB/T 9074.15-88 | UDC 621.882
• 六角头螺栓和外锯齿锁紧垫圈组合件 Hexagon head bolt and serrated lock washer external teeth assemblies
GB/T 9074.16-88 | UDC 621.882
• 六角头螺栓、弹簧垫圈和平垫圈组合件 Hexagon head bolt,single coil spring lock washer and plain washer assemblies
GB/T 9074.17-88 | UDC 621.882
• 自攻螺钉和平垫圈组合件 Tapping screw and washer assemblies with plain washers
GB/T 9074.18-2002 | 代替GB/T 9074.18、9074.19、9074、22、9074、23-1988
• 十字槽凹穴六角头自攻螺钉和平垫圈组合件 Cross recessed hexagon head tapping screw with indentation and plain washer assemblies
GB/T 9074.20-88 | UDC 621.882
• 十字槽凹穴六角头自攻螺钉和大垫圈组合件 Cross recessed hexagon head tapping sorew with indentation and large plain washer assemblies
GB/T 9074.21-88 | UDC 621.882
• 组合件用弹簧垫圈 Single coil spring lock washer for assembly
GB/T 9074.26-88 | UDC 621.882
• 组合件用外锯齿锁紧垫圈 Serrated lock washer external teeth for assembly
GB/T 9074.27-88 | UDC 621.882
• 组合件用锥形锁紧垫圈 Lountersunk external toothed lock washer for assembly
GB/T 9074.28-88 | UDC 621.882
• 腰状杆螺柱连接副型式分类 Connections with waisted stud-Tape classification
GB/T 13807.1-92
• 腰状杆螺柱连接副螺柱 Connections with waisted stud-Studs
GB/T 13087.2-92
• 腰状杆螺柱连接副螺母、受力套管 Connections with waisted stud-Nuts,extension sleeves
GB/T 13087.3-92
• 栓接结构用大六角头螺栓 螺纹长度按GB/T 3106 C级 8.8和10.9级 Hexagon bolts for high-strength structural bolting with large width across flats(thread lengths according to GB/T 3106)-Product grade C-Property classes 8.8 and 10.9
GB/T 18230.1-2000
• 栓接结构用大六角头螺栓 短螺纹长度 C级 8.8和 10.9级 Hexagon bolts for high-strengthstructural bolting with large width across flats(short thread length)-Product grade C-property classes 8.8 and 10.9
GB/T 18230.2-2000
• 栓接结构用大六角头螺母 B级 8和10级 Hexagon nuts for high-strength structural bliting with large width across flats-Product grade B-Property classes 8 and 10
GB/T 18230.3-2000
• 栓接结构用1型大六角螺母 B级 10级 Hexagon nuts for structural bolting with large width across flats,style 1-Product grade B-Property class 10
GB/T 18230.4-2000
• 栓接结构用平垫圈 淬火并回火 Plain washers for high-strength structural bolting hardened and tempered
GB/T 18230.5-2000
• 栓接结构用1型大六角螺母浸热 镀锌(加大攻丝尺寸) A和B级 5.6和8级 Hexagon nuts for structural bolting,style 1,hot-dip galvanized(oversize tapped)-Product grade A and B-Property classes 5.6 and 8
GB/T 18230.6-2000
• 栓接结构用2型大六角螺母浸热 镀锌(加大攻丝尺寸) A级 9级 Hexagon nuts for structural bolting,style 2,hot-dip galvanized(oversize tapped)-Product grade A -Property class 9
GB/T 18230.7-2000
焊钉
• 无头焊钉 Headless studs for stud welding
GB/T 10432-89
• 电弧螺柱焊用圆柱头焊钉 Cheese head studs for arc stud welding
GB/T 10433-2002 | 代替GB/T 10433-1989
• 六角薄螺母 GB/T 6172.1-2000
• 盖形螺母 GB/T 923-88
• 标准型弹簧垫圈 GB/T 93-87
• 内六角沉头螺钉 GB/T 70.3-2000
• 内六角平圆头螺钉 GB/T 70.2-2000
• 内六角圆柱头螺钉 GB/T 70.1-2000
• 内六角凹端紧定螺钉 GB/T 80-2000
• 平垫圈 A级 GB/T 97.1-2002
• 钢结构用高强度垫圈 GB/T 1230-91
• 钢结构用高强度大六角头螺母 GB/T 1229-91
• 钢结构用高强度大六角头螺栓 GB/T 1228-91
• 大半圆头方颈螺栓 C级 GB/T 14-1998
• 半圆头方颈螺栓 GB/T 12-88
• 十字槽小盘头螺钉 GB/T 823-88
• 等长双头螺柱 B级 GB/T 901-88
• 十字槽沉头螺钉 第1部分：钢4.8级 GB/T 819.1-2000
• 十字槽盘头螺钉 GB/T 818-2000
• 开口型扁圆头抽芯铆钉 GB/T 12618-90
• 圆柱销 不淬硬钢和奥氏体不锈钢 GB/T 119.1-2000
• 十字槽沉头自攻螺钉 GB/T 846-85
• 十字槽盘头自攻螺钉 GB/T 845-85
• 小垫圈 A级 GB/T 848-2002
• 大垫圈 A级 GB/T 96.1-2002
• 六角头螺栓 GB/T 5782-2000
• 六角头螺栓 全螺纹 GB/T 5783-2000
所有GB标准
螺栓
• 方头螺栓 C级 Square head bolts-Product grade C
GB/T 8-88 | UDC 621.882.6 | 代替GB8-76
• 沉头方颈螺栓 Flat countersunk square neck bolts
GB/T 10-88 | UDC 621.882.6 | 代替GB10-76
• 沉头带榫螺拴 Flat countersunk nib bolts
GB/T 11-88 | UDC 621.882.6 | 代替GB11-76
• 半圆头方颈螺栓 Cup head square neck bolts
GB/T 12-88 | UDC 621.882.6 | 代替GB12-76
• 半圆头带榫螺栓 Cup head nid bolts
GB/T 13-88 | UDC 621.882.6 | 代替GB13-76
• 大半圆头方颈螺栓 C级 Cup head square neck bolts with large head-Product grade C
GB/T 14-1998 | 代替GB14-88
• 大半圆头带榫螺栓 Cup head nib bolts with large head
GB/T 15-88 | UDC 621.882.6 | 代替GB15-76
• 六角头铰制孔用螺栓 Hexagon fit bolts-product grade A and B
GB/T 27-88 | UDC 621.882.6 | 代替GB27-76
• 六角头螺杆带孔铰制孔用螺栓 Hexagon fit bolts with split pin hole on shank-product grade A and B
GB/T 28-88 | UDC 621.882.6 | 代替GB28-76
• 六角头头部带槽螺栓 A 和 B 级 Hexagon bolts with slot on head -product A and B
GB/T 29.1-88 | UDC 621.882.6 | 代替GB29-76
• 十字槽凹穴六角头螺栓 Cross recessed hexagon bolts with indentation
GB/T 29.2-88 | UDC 621.882.6 | 代替GB29-76
• 下方头螺栓 B级 Square head bolts with small head-praduct grade B
GB/T 35-88 | UDC 621.882.6 | 代替GB35-76
• T 形槽用螺栓 Bolts for T-Slot
GB/T 37-88 | UDC 621.882.6 | 代替GB37-76
• 加强半圆头方颈螺栓 Strengthened cup head square neck bolts
GB/T 794-93 | 代替GB794-67
• 六角头螺杆带孔螺栓 Hexagon bolts with split pin hole on shank-product grade A and B
GB/T 31.1-88 | UDC 621.882.6 | 代替GB31、23、24-76
• 六角头螺杆带孔螺栓 细杆 B级 Hexagon bolts with split pin hole on shank-Reduced shank-product grade B
GB/T 31.2-88 | UDC 621.882.6 | 代替GB31、23、24-76
• 六角头螺杆带孔螺栓 细牙 A和B级 Hexagon bolts with split pin hole on shank-Fine pitch thread-product grade A and B
GB/T 31.3-88 | UDC 621.882.6 | 代替GB31、23、24-76
• 六角头头部带孔螺栓 A 和 B级 Hexagon bolts with wire holes on head-product grade A and B
GB/T 32.1-88 | UDC 621.882.6 | 代替GB32、25、26-76
• 六角头头部带孔螺栓 细杆 B级 Hexagon bolts with wire holes on head-Reduced shank-product grade B
GB/T 32.2-88 | UDC 621.882.6 | 代替GB32、25、26-76
• 六角头头部带孔螺栓 细牙 A 和 B 级 Hexagon bolts with wire holes on head-Fine pitch thread-product grade A and B
GB/T 32.3-88 | UDC 621.882.6 | 代替GB32、25、26-76
• 活节螺栓 Eye bolts
GB/T 798-88 | UDC 621.882.6 | 代替GB798-76
• 地脚螺栓 Eyelet bolts
GB/T 799-88 | UDC 621.882.6 | 代替GB799-76
• 沉头双榫螺 Flat countersunk double nib bolts
GB/T 800-88 | UDC 621.882.6 | 代替GB800-77
• 小半圆头低方颈螺栓 B级 Cup head square neck bolts with small head and short neck-product grade B
GB/T 801-1998 | 代替GB801-88
• 六角头螺栓 C级 Hexagon head bolts-product grade C
GB/T 5780-2000 | 代替GB/T 5780-1986
• 六角头螺栓 全螺纹 C级 Hexagon head bolts-Full thread-product grade C
GB/T 5781-2000 | 代替GB/T 5781-1986
• 六角头螺栓 Hexagon head bolts
GB/T 5782-2000 | 代替GB/T 5782-1986
• 六角头螺栓 全螺纹 Hexagon head bolts-Full thread
GB/T 5783-2000 | 代替GB/T 5783-1986
• 六角头螺栓-细杆-B级 Hexagon head bolts-Reduced shank -Product grade B
GB/T 5784-86 | UDC 621.882.6 | 代替GB30、21-76
• 六角头螺栓 细牙 Hexagon head bolts with fine pitch thread
GB/T 5785-2000 | 代替GB/T 5785-1986
• 六角头螺栓 细牙 全螺纹 Hexagon head bolts with fine pitch thread-Full thread
GB/T 5786-2000 | 代替GB/T 5786-1986
• 六角法兰面螺栓-加大系列-B级 Hexagon flange bolts-Heavy series-product grade B
GB/T 5789-86 | UDC 621.882.6
• 六角法兰面螺栓-加大系列-细杆-B级 Hexagon flange bolts-Heavy series-product grade B
GB/T 5790-86 | UDC 621.882.6
• 六角法兰面螺栓 小系列 Hexagon flange bolts-Small series
GB/T 16674-1996 | 代替GB/T 5787、5788-1986
• 钢网架螺栓球节点用高强度螺栓 High strength bolts for joints of space grid structures
GB/T 16939-1997
螺钉
• 开槽凹端紧定螺钉 Slotted set screws with cup point
GB/T 74-85 | UDC 621.882.219.4.092.6 | 代替GB74-76
• 方头长圆柱端紧定螺钉 Square set screws with long dog point
GB/T 85-88 | UDC 621.882.2 | 代替GB85-76
• 十字槽半沉头螺钉 Countersunk raised head screws (common head style) with cross recess
GB/T 820-2000 | 代替GB/T 820-1985
• 开槽圆柱端定位螺钉 Slotted setscrews with dog point
GB/T 829-88 | UDC 621.882.2 | 代替GB829-76
• 开槽大圆柱头螺钉 Slotted large cheese head screws
GB/T 833-88 | UDC 621.882.2 | 代替GB833-76
• 六角头不脱出螺钉 Hexagon screws with waisted shank
GB/T 838-88 | UDC 621.882.2 | 代替GB838-76
• 滚花高头螺钉 Knurled thumb screws
GB/T 834-88 | UDC 621.882.2 | 代替GB834-76
• 滚花平头螺钉 Knurled screws
GB/T 835-88 | UDC 621.882.2 | 代替GB835-76
• 滚花小头螺钉 Knurled screws with small head
GB/T 836-88 | UDC 621.882.2 | 代替GB836-76
• 开槽盘头不脱出螺钉 Slotted pan head screws with waisted shank
GB/T 837-88 | UDC 621.882.2 | 代替GB837-76
• 方头短圆柱锥端紧定螺钉 Square set screws with short dog point and cone end
GB/T 86-88 | UDC 621.882.2 | 代替GB86-76
• 十字槽盘头螺钉 Pan head screws with cross recess
GB/T 818-2000 | 代替GB/T 818-1985
• 十字槽沉头螺钉 第1部分：钢4.8级 Countersunk flat head screws (common head style)with cross recess-Part 1:Steel of property class 4.8
GB/T 819.1-2000 | 代替GB/T 819-1985
• 十字槽沉头螺钉 第2部分：钢8.8、不锈钢A2-70和有色金属CU2或CU3 Cross recessed countersunk flat head screws (common head style)-Grade A-Part 2:Steel of property class 8.8, stainless and non-ferrous metals
GB/T 819.2-1997
• 方头平端紧定螺钉 Square set screws with chamfered end
GB/T 821-88 | UDC 621.882.2 | 代替GB821-76
• 十字槽圆柱头螺钉 Cheese head screws with cross recess
GB/T 822-2000 | 代替GB/T 822-1988
• 十字槽小盘头螺钉 Cross recessed small pan head screws
GB/T 823-88 | UDC 621.882.2 | 代替GB823-76
• 吊环螺钉 Eyebolts
GB/T 825-88 | UDC 621.882 | 代替GB825-76
• 精密机械用紧固件十字槽螺钉 Fasteners for mechanics-Cross recessed screws
GB/T 13806.1-92
• 方头凹端紧定螺钉 Square set screws with cup point
GB/T 84-88 | UDC 621.882.2 | 代替GB84-76
• 开槽盘头定位螺钉 Slotted pan head set setscrews with dog point
GB/T 828-88 | UDC 621.882.2 | 代替GB828-76
• 滚花头不脱出螺钉 Knurled thumb screws with waisted shank
GB/T 839-88 | UDC 621.882.2 | 代替GB839-76
• 塑料滚花头螺钉 Plastic diamond knurlhead screws
GB/T 840-88 | UDC 621.882.2 | 代替GB840-79
• 开槽球面圆柱头轴位螺钉 Slotted raised head with shoulder
GB/T 946-88 | UDC 621.882.2 | 代替GB946-76
• 开槽球面大圆柱头螺钉 Slotted large raised cheese head screws
GB/T 947-88 | UDC 621.882.2 | 代替GB947-76
• 开槽沉头不脱出螺钉 Slotted countersunk head screws with waisted shank
GB/T 948-88 | UDC 621.882.2 | 代替GB948-76
• 开槽半沉头不脱出螺钉 Slotted raised countersunk head screws with waisted shank
GB/T 949-88 | UDC 621.882.2 | 代替GB949-76
• 开槽长圆柱端紧定螺钉 Slotted set screws with long dog point
GB/T 75-85 | UDC 621.882.219.4.092.5 | 代替GB75-76
• 方头长圆柱球面端紧定螺钉 Square set screws with long dog point and rounded end
GB/T 83-88 | UDC 621.882.2 | 代替GB83-76
• 开槽圆柱头轴位螺钉 Slotted cheese head screws with shoulder
GB/T 830-88 | UDC 621.882.2 | 代替GB830-76
• 开槽无头轴位螺钉 Slotted shoulder screws
GB/T 831-88 | UDC 621.882.2 | 代替GB831-76
• 开槽带孔球面圆柱头螺钉 Slotted capstan screws
GB/T 832-88 | UDC 621.882.2 | 代替GB832-76
• 开槽圆柱头螺钉 Slotted cheese head screws
GB/T 65-2000 | 代替GB/T 65-1985
• 开槽盘头螺钉 Slotted pan head screws
GB/T 67-2000 | 代替GB/T 67-1985
• 开槽沉头螺钉 Slotted countersunk flat head screws (common head style)
GB/T 68-2000 | 代替GB/T 68-1985
• 开槽半沉头螺钉 Countersunk slotted raised head screws (common head style)
GB/T 69-2000 | 代替GB/T 69-1985
• 开槽锥端紧定螺钉 Slotted set screws with cone point
GB/T 71-85 | UDC 621.882.219 | 代替GB71-76
• 开槽锥端定位螺钉 Slotted setscrews with cone point
GB/T 72-88 | UDC 621.882.2 | 代替GB72-76
• 开槽平端紧定螺钉 Slotted set screws with flat point
GB/T 73-85 | UDC 621.882.219.4 | 代替GB73-76
内六角螺钉
• 内六角花形盘头螺钉 Hexagon lobular socket pan head screws
GB/T 2672-86 | UDC 621.882.2 | 代替GB2672-81
• 内六角圆柱头轴肩螺钉 Hexagon socket head shoulder screws
GB/T 5281-85 | UDC 621.882.215.6
• 内六角花形沉头螺钉 Hexagon lobular socket countersunk head screws
GB/T 2673-86 | UDC 621.882.2 | 代替GB2673-81
• 内六角花形半沉头螺钉 Hexagon lobular socket raised countersunk head screws
GB/T 2674-86 | UDC 621.882.2 | 代替GB2674-81
• 内六角花形圆柱头螺钉-4.8级 Hexagon lobular socket head cap screws-property class 4.8
GB/T 6190-86 | UDC 621.882.2 | 代替GB2671-81
• 内六角花形圆柱头螺钉-8.8和10.9级 Hexagon lobular socket head cap screws-property class 8.8 and 10.9
GB/T 6191-86 | UDC 621.882.2 | 代替GB2671-81
• 内六角平端紧定螺钉 Hexagon socket set screws with flat point
GB/T 77-2000 | 代替GB/T 77-1985
• 内六角锥端紧定螺钉 Hexagon socket set screws with cone point
GB/T 78-2000 | 代替GB/T 78-1985
• 内六角圆柱端紧定螺钉 Hexagon socket set screws with dog point
GB/T 79-2000 | 代替GB/T 79-1985
• 内六角凹端紧定螺钉 Hexagon socket set screws with cup point
GB/T 80-2000 | 代替GB/T 80-1985
• 内六角圆柱头螺钉 Hexagon socket head cap screws
GB/T 70.1-2000 | 代替GB/T 70-1985
• 内六角平圆头螺钉 Hexagon socket button head screws
GB/T 70.2-2000
• 内六角沉头螺钉 Hexagon socket countersunk head screws
GB/T 70.3-2000
自攻螺钉
• 十字槽半沉头自攻锁紧螺钉 Cross recessed raised countersunk head thread forming screws
GB/T 6562-86 | UDC 621.882
• 六角头自攻锁紧螺钉 Hexagon head thread forming screws
GB/T 6563-86 | UDC 621.882
• 内六角花形圆柱头自攻锁紧螺钉 Hexagon lobular socket thread forming screws
GB/T 6564-86 | UDC 621.882
• 十字槽盘头自攻螺钉 Cross recessed pan head tapping screws
GB/T 845-85 | UDC 621.882.216.5.082.8 | 代替GB845-76
• 十字槽沉头自攻螺钉 Cross recessed countersunk head tapping screws
GB/T 846-85 | UDC 621.882.216.5.082.8 | 代替GB846-76
• 十字槽半沉头自攻螺钉 Cross recessed raised countersunk head tapping screws
GB/T 847-85 | UDC 621.882.216.5.082.8 | 代替GB847-76
• 开槽盘头自攻螺钉 Slotted pan head tapping screws
GB/T 5282-85 | UDC 621.882.215.082.8
• 开槽沉头自攻螺钉 Slotted countersunkhead tapping screws
GB/T 5283-85 | UDC 621.882.215.082.8
• 开槽半沉头自攻螺钉 Slotted raised countersunkhead tapping screws
GB/T 5284-85 | UDC 621.882.215.082.8
• 六角头自攻螺钉 Hexagon head tapping screws
GB/T 5285-85 | UDC 621.882.215.082.8
• 十字槽盘头自攻锁紧螺钉 Cross recessed pan head thread forming screws
GB/T 6560-86 | UDC 621.882
• 十字槽沉头自攻锁紧螺钉 Cross recessed countersunk head thread forming screws
GB/T 6561-86 | UDC 621.882
• 十字槽头凹穴六角头自攻螺钉 Cross recessed hexagon head tapping screws with indentation
GB/T 9456-88 | UDC 621.882.2
• 精密机械用紧固件十字槽自攻螺钉 刮削端 Fasteners for fine mechanics-Cross recessed tapping screws-Scrape point
GB/T 13806.2-92
• 墙板自攻螺钉 Dry wall screws
GB/T 14210-93
• 十字槽盘头自钻自攻螺钉 Cross recessed pan head drilling screws with tapping screw thread
GB/T 15856.1-2002 | 代替GB/T 15856.1-1995
• 十字槽沉头自钻自攻螺钉 Cross recessed countersunk head drilling screws with tapping screw thread
GB/T 15856.2-2002 | 代替GB/T 15856.2-1995
• 十字槽半沉头自钻自攻螺钉 Cross recessed raised countersunk head drilling screws with tapping screw thread
GB/T 15856.3-2002 | 代替GB/T 15856.3-1995
• 六角法兰面自钻自攻螺钉 Hexagon flange drilling screws with tapping screw thread
GB/T 15856.4-2002 | 代替GB/T 15856.4-1995
• 六角凸缘自钻自攻螺钉 Hexagon washer head drilling screws with tapping screw thread
GB/T 15856.5-2002
• 六角凸缘自攻螺钉 Hexzgon head tapping screws with collar
GB/T 16824.1-1997
• 六角法兰面自攻螺钉 Hexagon flange head tapping screws
GB/T 16824.2-1997
木螺钉
• 开槽圆头木螺钉 Slotted round head wood screws
GB/T 99-86 | UDC 621.882.2 | 代替GB99-76
• 开槽沉头木螺钉 Slotted countersunk head wood screws
GB/T 100-86 | UDC 621.882.2 | 代替GB100-76
• 开槽半沉头木螺钉 Slotted raised countersunk head wood screws
GB/T 101-86 | UDC 621.882.2 | 代替GB101-76
• 六角头木螺钉 Hexagon head wood screws
GB/T 102-86 | UDC 621.882.2 | 代替GB102-76
• 十字槽圆头木螺钉 Cross recessed round head wood screws
GB/T 950-86 | UDC 621.882.2 | 代替GB950-76
• 十字槽沉头木螺钉 Cross recessed countersunk head wood screws
GB/T 951-86 | UDC 621.882.2 | 代替GB951-76
• 十字槽半沉头木螺钉 Cross recessed raised head countersunk head wood screws
GB/T 952-86 | UDC 621.882.2 | 代替GB952-76
螺杆和螺柱
• 储能焊用焊接螺柱 Weld studs for capacitor discharge welding
GB/T 902.3-89 | 代替GB902-76
• 等长双头螺柱 C级 Double end studs(clamping type)-product grade C
GB/T 953-88 | UDC 621.882 | 代替GB953-76
• 螺杆 Threaded rods
GB/T 15389-94
• 双头螺柱 bm=1d Double end studs-bm=1d
GB/T 897-88 | UDC 621.882 | 代替GB897-76
• 双头螺柱 bm=1.25d Double end studs-bm=1.25d
GB/T 898-88 | UDC 621.882 | 代替GB898-76
• 双头螺柱 bm=1.5d Double end studs-bm=1.5d
GB/T 899-88 | UDC 621.882 | 代替GB899-76
• 双头螺柱 bm=2d Double end studs--bm=2d
GB/T 900-88 | UDC 621.882 | 代替GB900-76
• 等长双头螺柱 B级 Double end studs(clamping type) -Product grade B
GB/T 901-88 | UDC 621.882 | 代替GB901-76
• 手工焊用焊接螺柱 Weld studs for manual welding
GB/T 902.1-89 | 代替GB902-76
• 机动弧焊用焊接螺柱 Weld studs for arc welding
GB/T 902.2-89 | 代替GB902-76
铆钉
• 平头铆钉 Flat head rivets
GB/T 109-86 | UDC 621.884 | 代替GB109-76
• 标牌铆钉 Rivets for name plate
GB/T 827-86 | UDC 621.884 | 代替GB827-76
• 半圆头铆钉(粗制) Round head rivets-Black
GB/T 863.1-86 | UDC 621.884 | 代替GB863-76
• 小半圆头铆钉(粗制) Round head rivets with small head-Black
GB/T 863.2-86 | UDC 621.884
• 平锥头铆钉(粗制) Cone head rivets-Black
GB/T 864-86 | UDC 621.884 | 代替GB864-76
• 沉头铆钉(粗制) Countersunk head rivets-Black
GB/T 865-86 | UDC 621.884 | 代替GB865-86
• 半沉头铆钉(粗制) Oval countersunk head rivets-Black
GB/T 866-86 | UDC 621.884 | 代替GB866-76
• 半圆头铆钉 Round head rivets
GB/T 867-86 | UDC 621.884 | 代替GB867-76
• 平锥头铆钉 Cone head rivets
GB/T 868-86 | UDC 621.884 | 代替GB868-76
• 沉头铆钉 Countersunk head rivets
GB/T 869-86 | UDC 621.884 | 代替GB869-76
• 半沉头铆钉 Oval countersunk head rivets
GB/T 870-86 | UDC 621.884 | 代替GB870-76
• 扁圆头铆钉 Flat round head rivets
GB/T 871-86 | UDC 621.884 | 代替GB871-76
• 扁平头铆钉 Thin head rivets
GB/T 872-86 | UDC 621.884 | 代替GB872-76
• 扁圆头半空心铆钉 Oval head semi-tubular rivets
GB/T 873-86 | UDC 621.884 | 代替GB873-76
• 120°沉头半空心铆钉 120 degree countersunk head semi-tubular rivets
GB/T 874-86 | UDC 621.884 | 代替GB874-76
• 扁平头半空心铆钉 Thin head semi-tubular rivets
GB/T 875-86 | UDC 621.884 | 代替GB875-76
• 空心铆钉 Tubular rivets
GB/T 876-86 | UDC 621.884 | 代替GB876-76
• 120°沉头铆钉 120 degree countersunk head rivets
GB/T 954-86 | UDC 621.884 | 代替GB954-76
• 管状铆钉 Pipe type rivets
GB/T 975-86 | UDC 621.884 | 代替GB975-76
• 大扁圆头铆钉 Truss head rivets
GB/T 1011-86 | UDC 621.884 | 代替GB1011-76
• 120°半沉头铆钉 120 degree oval countersunk rivets
GB/T 1012-86 | UDC 621.884 | 代替GB1012-76
• 平锥头半空心铆钉 Cone head semi-tubler rivets
GB/T 1013-86 | UDC 621.884 | 代替GB1013-76
• 大扁圆头半空心铆钉 Truss head semi-tublar rivets
GB/T 1014-86 | UDC 621.884 | 代替GB1014-76
• 沉头半空心铆钉 Countersunk head semi-tublar rivets
GB/T 1015-86 | UDC 621.884 | 代替GB1015-76
• 无头铆钉 Headless rivets
GB/T 1016-86 | UDC 621.884 | 代替GB1016-76
• 封闭型扁圆头抽芯铆钉 Mushroom head break mandrel closed end blind rivets
GB/T 12615-90
• 封闭型沉头抽芯铆钉 120 deg flush head break mandrel closed end blind rivets
GB/T 12616-90
• 开口型沉头抽芯铆钉 120 deg flush head break mandrel blind rivets
GB/T 12617-90
• 开口型扁圆头抽芯铆钉 Mushroom head break mandrel blind rivets
GB/T 12618-90
• 扁圆头击芯铆钉 Flat round head drive rivets
GB/T 15855.1-1995
• 沉头击芯铆钉 Countersunk head drive rivets
GB/T 15855.2-1995
螺母
• 全金属六角法兰面锁紧螺母 细牙 Prevailing torque type all-metal hexagon nuts with flange with fine pitch thread
GB/T 6187.2-2000
• 方螺母 C级 Square nuts-product grade C
GB/T 39-88 | UDC 621.882.3 | 代替GB39-76
• 六角螺母 C级 Hexagon nuts-product grade C
GB/T 41-2000 | 代替GB/T 41-1986
• 六角厚螺母 Hexagon thick nuts
GB/T 56-88 | 代替GB56-76
• 蝶形螺母 Wing nuts
GB/T 62-88 | UDC 621.882.3 | 代替GB62-76
• 环形螺母 Lifting nuts
GB/T 63-88 | UDC 621.882.3 | 代替GB63-76
• 组合式盖形螺母 Acorn nuts
GB/T 802-88 | UDC 621.882.3 | 代替GB802-76
• 球面六角螺母 Hexagon nuts with raised face
GB/T 804-88 | UDC 621.882.3 | 代替GB804-76
• 2型六角螺母 Hexagon nuts,style 2
GB/T 6175-2000 | 代替GB/T 6175-1986
• 2型六角螺母 细牙 Hexagon nuts,style 2,with fine pitch thread
GB/T 6176-2000 | 代替GB/T 6176-1986
• 六角法兰面螺母 Hexagon nuts with flange
GB/T 6177.1-2000 | 代替GB/T 6177-1986
• 六角法兰面螺母 细牙 Hexagon nuts with flange-fine pitch thread
GB/T 6177.2-2000
• 1型六角开槽螺母-A和B级 Hexagon slotted and castle nuts,style 1 -product grades A and B
GB/T 6178-86 | UDC 621.882.3 | 代替GB57~58-76
• 1型六角开槽螺母-C级 Hexagon slotted nuts,style 1 -product grade C
GB/T 6179-86 | UDC 621.882.3 | 代替GB57~58-76
• 2型六角开槽螺母-A和B级 Hexagon slotted and castle nuts,style 2 -Product grades A and B
GB/T 6180-86 | UDC 621.882.3
• 六角开槽薄螺母-A和B级 Hexagon thin slotted nuts-Product grades A and B
GB/T 6181-86 | UDC 621.882.3 | 代替GB59~60-76
• 2型非金属嵌件六角锁紧螺母 Prevailing torque type hexagon nuts(with non-metallic insert),style 2
GB/T 6182-2000 | 代替GB/T 6182-1986
• 非金属嵌件六角法兰面锁紧螺母 Prevailing torque type hexagon nuts with flange(with non-metallic insert)
GB/T 6183.1-2000 | 代替GB/T 6183-1986
• 非金属嵌件六角法兰面锁紧螺母 细牙 Prevailing torque type hexagon nuts with flange(with non-metallic insert)with fine pitch thread
GB/T 6183.2-2000
• 1型全金属六角锁紧螺母 Prevailing torque type all-metal hexagon nuts,style 1
GB/T 6184-2000 | 代替GB/T 6184-1986
• 2型全金属六角锁紧螺母 Prevailing torque type all-metal hexagon nuts,style 2
GB/T 6185.1-2000 | 代替GB/T 6185-1986
• 2型全金属六角锁紧螺母 细牙 Prevailing torque type all-metal hexagon nuts,style 2,with fine pitch thread
GB/T 6185.2-2000
• 2型全金属六角锁紧螺母 9级 Prevailing torque type all-metal hexagon nuts,style 2-Property class 9
GB/T 6186-2000 | 代替GB/T 6186-1986
• 全金属六角法兰面锁紧螺母 Prevailing torque type all-metal hexagon nuts with flange
GB/T 6187.1-2000 | 代替GB/T 6187-1986
• 扣紧螺母 Tight nuts
GB/T 805-88 | UDC 621.882.3 | 代替GB805-76
• 滚花高螺母 Knurled nut with collar
GB/T 806-88 | UDC 621.882.3 | 代替GB806-76
• 滚花薄螺母 Knurled nuts
GB/T 807-88 | UDC 621.882.3 | 代替GB807-76
• 小六角特扁细牙螺母 Small hexagon thin nuts-Fine pitch thread
GB/T 808-88 | UDC 621.882.3 | 代替GB808-76
• 嵌装圆螺母 Lnsert round nuts
GB/T 809-88 | UDC 621.882.3 | 代替GB809-76
• 小圆螺母 Small round nuts
GB/T 810-88 | UDC 621.882.3 | 代替GB810-76
• 圆螺母 Round nuts
GB/T 812-88 | UDC 621.882.3 | 代替GB812-76
• 端面带孔圆螺母 Round nuts with drilled holes in one face
GB/T 815-88 | UDC 621.882.3 | 代替GB815-76
• 侧面带孔圆螺母 Round nuts with set pin holes in side
GB/T 816-88 | UDC 621.882.3 | 代替GB816-79
• 带槽圆螺母 Slotted round nuts
GB/T 817-88 | UDC 621.882.3 | 代替GB817-76
• 1型非金属嵌件六角锁紧螺母 Prevailing torque type hexagon nuts(with non-metallic insert),style 1
GB/T 889.1-2000 | 代替GB/T 889-1986
• 1型六角开槽螺母 细牙 A和B级 Hexagon slotted and castle nuts,style 1-fine pitch thread-product grades A and B
GB/T 9457-88 | UDC 621.882.3 | 代替GB57、58-76
• 2型六角开槽螺母 细牙 A和B级 Hexagon slotted and castle nuts,style 2--Fine pitch thread -Product grades A and B
GB/T 9458-88 | UDC 621.882.3
• 六角开槽薄螺母 细牙 A和B级 Hexagon thin slotted nuts--Fine pitch thread -Product grades A and B
GB/T 9459-88 | UDC 621.882.3 | 代替GB59、60-76
• 焊接方螺母 Square weld nuts
GB/T 13680-92
• 焊接六角螺母 Hexagon weld nuts
GB/T 13681-92
• 平头铆螺母 Flat head riveted nuts
GB/T 17880.1-1999
• 沉头铆螺母 Countersunk head riveted nuts
GB/T 17880.2-1999
• 小沉头铆螺母 Small countersunk head riveted nuts
GB/T 17880.3-1999
• 120°小沉头铆螺母 120°Small countersunk head riveted nuts
GB/T 17880.4-1999
• 平头六角铆螺母 Flat head hexagon riveted nuts
GB/T 17880.5-1999
• 精密机械用六角螺母 Hexagon nuts for fine mechanics
GB/T 18195-2000
• 盖形螺母 Acorn nuts
GB/T 923-88 | UDC 621.882.3 | 代替GB923-76
• 1型非金属嵌件六角锁紧螺母 细牙 Prevailing torque type hexagon nuts(with non-metallic insert),style 1,with fine pitch thread
GB/T 889.2-2000
• 1型六角螺母 Hexagon nuts,style 1
GB/T 6170-2000 | 代替GB/T 6170-1986
• 1型六角螺母 细牙 Hexagon nuts,style 1,with fine pitch thread
GB/T 6171-2000 | 代替GB/T 6171-1986
• 六角薄螺母 Hexagon thin nuts(chamfered)
GB/T 6172.1-2000 | 代替GB/T 6172-1986
• 非金属嵌件六角锁紧薄螺母 Prevailing torque type hexagon thin nuts(with non-metallic insert)
GB/T 6072.2-2000
• 六角薄螺母 细牙 Hexagon thin nuts(chamfered) with fine pitch thread
GB/T 6173-2000 | 代替GB/T 6173-1986
• 六角薄螺母 无倒角 Hexagon thin nuts(unchamfered)
GB/T 6174-2000 | 代替GB/T 6174-1986
垫圈
• 大垫圈 A级 Plain washers-Large series-Product grade A
GB/T 96.1-2002 | 代替GB/T 96-1985
• 大垫圈 C级 Plain washers-Large series-Product grade C
GB/T 96.2-2002 | 代替GB/T 96-1985
• 平垫圈 倒角型 A级 Plain washers,chamfered-Product grade A
GB/T 97.2-2002 | 代替GB/T 97.2-1985
• 平垫圈 用于螺钉和垫圈组合件 Plain washers for screw and washer assemblies
GB/T 97.4-2002 | 代替GB/T 9074.24、9074.25-1988
• 球面垫圈 Washers with ball face
GB/T 849-88 | UDC 621.882.4 | 代替GB849-76
• 锥面垫圈 Washers with cone face
GB/T 850-88 | UDC 621.882.4 | 代替GB850-76
• 开口垫圈 Washers with split
GB/T 851-88 | UDC 621.882.4 | 代替GB851-76
• 平垫圈 用于自攻螺钉和垫圈组合件 Plain washers for tapping screw and washer assemblies
GB/T 97.5-2002 | 代替GB/T 9074.29、9074.30-1988
• 小垫圈 A级 Plain washers-small series-Product grade A
GB/T 848-2002 | 代替GB/T 848-1985
• 工字钢用方斜垫圈 Square taper washers for I section
GB/T 852-88 | UDC 621.882.4 | 代替GB852-76
• 槽钢用方斜垫圈 Square taper washers for slot section
GB/T 853-88 | UDC 621.882.4 | 代替GB853-76
• 单耳止动垫圈 Tab washers with long tab
GB/T 854-88 | UDC 621.882.4 | 代替GB854-76
• 双耳止动垫圈 Tab washers with long tab and wing
GB/T 855-88 | UDC 621.882.4 | 代替GB855-76
• 外舌止动垫圈 External tab washers
GB/T 856-88 | UDC 621.882.4 | 代替GB856-76
• 圆螺母用止动垫圈 Tab washers for round nut
GB/T 858-88 | UDC 621.882.4 | 代替GB858-76
• 轻型弹簧垫圈 Single coil spring lock washers,Light type
GB/T 859-87 | UDC 621.882.4 | 代替GB859-76
• 鞍形弹性垫圈 Curved spring washers
GB/T 860-87 | UDC 621.882.4 | 代替GB860-76
• 内齿锁紧垫圈 Lock washers internal teeth
GB/T 861.1-87 | UDC 621.882.4 | 代替GB861-76
• 内锯齿锁紧垫圈 Serrated lock washers internal teeth
GB/T 861.2-87 | UDC 621.882.4
• 外齿锁紧垫圈 Lock washers external teeth
GB/T 862.1-87 | UDC 621.882.4 | 代替GB862-76
• 外锯齿锁紧垫圈 Serrated lock washers external teeth
GB/T 862.2-87 | UDC 621.882.4
• 波形弹性垫圈 Wave spring washers
GB/T 955-87 | UDC 621.882.4 | 代替GB955-76
• 锥形锁紧垫圈 Countersunk external toothed lock washers
GB/T 956.1-87 | UDC 621.882.4 | 代替GB956-76
• 锥形锯齿锁紧垫圈 Countersunk Serrated external toothed lock washers
GB/T 956.2-87 | UDC 621.882.4
• 特大垫圈 C级 Plain washers-Extra large series-Product grade C
GB/T 5287-2002 | 代替GB/T 5287-1985
• 重型弹簧垫圈 Single coil spring lock washers,heavy type
GB/T 7244-87 | UDC 621.882.4
• 鞍形弹簧垫圈 Curved Single coil spring lock washers
GB/T 7245-87 | UDC 621.882.4
• 波形弹簧垫圈 Wave Single coil spring lock washers
GB/T 7246-87 | UDC 621.882.4
• 标准型弹簧垫圈 Single coil spring lock washers Normal type
GB/T 93-87 | UDC 621.882.4 | 代替GB93-76
• 平垫圈 C级 Plain washers-Product grade C
GB/T 95-2002 | 代替GB/T 95-1985
• 平垫圈 A级 Plain washers-Product grade A
GB/T 97.1-2002 | 代替GB/T 97.1-1985
• 销轴用平垫圈 Plain washers for clevis pins
GB/T 97.3-2000
挡圈
• 锥销锁紧挡圈 Lock rings with cone pin
GB/T 883-86 | UDC 621.885 | 代替GB883-76
• 螺钉锁紧挡圈 Lock ring with screw
GB/T 884-86 | UDC 621.885 | 代替GB884-76
• 带锁圈的螺钉锁紧挡圈 Lock rings with screw and circlip
GB/T 885-86 | UDC 621.885 | 代替GB885-76
• 轴肩挡圈 Rings for shoulder
GB/T 886-86 | UDC 621.885 | 代替GB886-76
• 螺钉紧固轴端挡圈 Lock rings at the end of shaft with screw
GB/T 891-86 | UDC 621.885 | 代替GB891-76
• 螺栓紧固轴端挡圈 Lock rings at the end of shaft with bolt
GB/T 892-86 | UDC 621.885 | 代替GB892-76
• 孔用弹性挡圈-A型 Circlips for holes-type A
GB/T 893.1-86 | UDC 621.885 | 代替GB893-76
• 孔用弹性挡圈-B型 Circlips for hole-type B
GB/T 893.2-86 | UDC 621.885
• 轴用弹性挡圈-A型 Circlips for shaft-type A
GB/T 894.1-86 | UDC 621.885 | 代替GB894-76
• 轴用弹性挡圈-B型 Circlips for shaft-type B
GB/T 894.2-86 | UDC 621.885
• 孔用钢丝挡圈 Roundwire snap rings for hole
GB/T 895.1-86 | UDC 621.885 | 代替GB895-76
• 轴用钢丝挡圈 Roundwire snap rings for shaft
GB/T 895.2-86 | UDC 621.885 | 代替GB895-76
• 开口挡圈 “E”rings
GB/T 896-86 | UDC 621.885 | 代替GB896-76
• 钢丝锁圈 Round wire circlips
GB/T 921-86 | UDC 621.885 | 代替GB921-76
• 夹紧挡圈 Grip rings
GB/T 960-86 | UDC 621.885 | 代替GB960-76
销及键
• 销轴 Clevis pins with head
GB/T 882-86 | UDC 621.886 | 代替GB882-76
• 开口销 Split pins
GB/T 91-2000 | 代替GB/T 91-1986
• 圆锥销 Taper pins
GB/T 117-2000 | 代替GB/T 117-1996
• 内螺纹圆锥销 Taper pins with internal thread
GB/T 118-2000 | 代替GB?T 118-1996
• 圆柱销 不淬硬钢和奥氏体不锈钢 Parallel pins,of unhardened steel and austenitic stainless steel
GB/T 119.1-2000 | 代替GB/T 119-1986
• 圆柱销 淬硬钢和马氏体不锈钢 Parallel pins,of hardened steel and martensitic stainless steel (Dowel pins)
GB/T 119.2-2000 | 代替GB/T 119-1986
• 开尾圆锥销 Taper pins with split
GB/T 877-76 | UDC 621.886 | 代替GB877-76
• 螺纹圆柱销 Parallel pins with external thread
GB/T 878-86 | UDC 621.886 | 代替GB878-76
• 带孔销 Pins with split pin hole
GB/T 880-86 | UDC 621.886 | 代替GB880-76
• 螺尾锥销 Taper pins with external thread
GB/T 881-2000 | 代替GB/T 881-1986
• 内螺纹圆柱销 不淬硬钢和奥氏体不锈钢 Parallel pins with internal thread, of unhardened steel and austenitic stainless steel
GB/T 120.1-2000 | 代替GB/T 120-1986
• 内螺纹圆柱销 淬硬钢和马氏体不锈钢 Parallel pins with internal thread,of hardened steel and martensitic stainless steel
GB/T 120.2-2000 | 代替GB/T 120-1986
• 弹性圆柱销 直槽 轻型 Spring-type straight pins-Slotted,light duty
GB/T 879.2-2000
• 弹性圆柱销 直槽 重型 Spring-type straight pins-Slotted, heavy duty
GB/T 879.1-2000 | 代替GB/T 879-1986
• 弹性圆柱销 卷制 重型 Spring-type straight pins-Coiled,heavy duty
GB/T 879.3-2000
• 弹性圆柱销 卷制 标准型 Spring-type straight pins-Coiled,standard duty
GB/T 879.4-2000
• 弹性圆柱销 卷制 轻型 Spring-type straight pins-Coiled,light duty
GB/T 879.5-2000
• 槽销 平行沟槽 Crooved pins-Parallel grooved
GB/T 13829.1-92
• 槽销 锥销 Crooved pins-taper grooved
GB/T 13829.2-92
• 槽销 圆头 沉头 Grooved pins-with round head or countersunk head
GB/T 13829.3-92
组合件和连接副
• 十字槽半沉头螺钉和锥形锁紧垫圈组合件 Cross recessed raised countersunk head screw and countersunk external toothed lock washer assemblies
GB/T 9074.10-88 | UDC 621.882
• 十字槽凹穴六角头螺栓和弹簧垫圈组合件 Cross recessed hexagon bolt with indetation single coil spring lock washer assemblies
GB/T 9074.12-88 | UDC 621.882
• 十字槽凹穴六角头螺栓、弹簧垫圈和平垫圈组合件 Cross recessed hexagon bolt with indetation,single coil lock washer and plain washer assemblies
GB/T 9074.13-88 | UDC 621.882
• 钢结构用高强度大六角头螺栓 High strength bolts with large hexagon head for steel structures
GB/T 1228-91 | 代替GB1228-84
• 钢结构用高强度大六角头螺母 High strength large hexagon nuts for steel structures
GB/T 1229-91 | 代替GB1229-84
• 钢结构用高强度垫圈 High strength plain washers for steel structures
GB/T 1230-91 | 代替GB1230-84
• 钢结构用扭剪型高强度螺栓连接副 Sets of torshear type high strength bolt hexagon nut and plain washer for steel structures
GB/T 3632-1995 | 代替GB3632-83
• 螺栓或螺钉和平垫圈组合件 Bolt or screw and washer assemblies with plain washers
GB/T 9074.1-2002 | 代替GB/T 9074.1、9074.14-1988
• 十字槽头螺钉和外锯齿锁紧垫圈组合件 Cross recessed pan head screw and serrated lock washer external teeth assemblies
GB/T 9074.2-88 | UDC 621.882
• 十字槽盘头螺钉和弹簧垫圈组合件 Cross recessed pan head screw and single coll spring lock washer assemblies
GB/T 9074.3-88 | UDC 621.882
• 十字槽盘头螺钉、弹簧垫圈和平垫圈组合件 Cross recessed pan head screw, single coil spring lock washer assemblies
GB/T 9074.4-88 | UDC 621.882
• 十字槽小盘头螺钉和平垫圈组合件 Cross recessed small pan head screw and small plain washer assemblies
GB/T 9074.5-88 | UDC 621.882
• 十字槽小盘头螺钉和大垫圈组合件 Cross recessed small pan head screw and big plain washer assemblies
GB/T 9074.6-88 | UDC 621.882
• 十字槽小盘头螺钉和弹簧垫圈组合件 Cross recessed small pan head screw and single coil spring lock washer assemblies
GB/T 9074.7-88 | UDC 621.882
• 十字槽小盘头螺钉、弹簧垫圈和平垫圈组合件 Cross recessed small pan head screw, single coil spring lock washer and plain washer assemblies
GB/T 9074.8-88 | UDC 621.882
• 十字槽沉头螺钉和锥形锁紧垫圈组合件 Cross recessed countersunk head screw and countersunk serrated external toothed lock washer assemblies
GB/T 9074.9-88 | UDC 621.882
• 十字槽凹穴六角头螺栓和平垫圈组合件 Cross recessed hexagon bolt with indentation and plain washer assemblies
GB/T 9074.11-88 | UDC 621.882
• 六角头螺栓和弹簧垫圈组合件 Hexagon head bolt and single coil spring lock washer assemblies
GB/T 9074.15-88 | UDC 621.882
• 六角头螺栓和外锯齿锁紧垫圈组合件 Hexagon head bolt and serrated lock washer external teeth assemblies
GB/T 9074.16-88 | UDC 621.882
• 六角头螺栓、弹簧垫圈和平垫圈组合件 Hexagon head bolt,single coil spring lock washer and plain washer assemblies
GB/T 9074.17-88 | UDC 621.882
• 自攻螺钉和平垫圈组合件 Tapping screw and washer assemblies with plain washers
GB/T 9074.18-2002 | 代替GB/T 9074.18、9074.19、9074、22、9074、23-1988
• 十字槽凹穴六角头自攻螺钉和平垫圈组合件 Cross recessed hexagon head tapping screw with indentation and plain washer assemblies
GB/T 9074.20-88 | UDC 621.882
• 十字槽凹穴六角头自攻螺钉和大垫圈组合件 Cross recessed hexagon head tapping sorew with indentation and large plain washer assemblies
GB/T 9074.21-88 | UDC 621.882
• 组合件用弹簧垫圈 Single coil spring lock washer for assembly
GB/T 9074.26-88 | UDC 621.882
• 组合件用外锯齿锁紧垫圈 Serrated lock washer external teeth for assembly
GB/T 9074.27-88 | UDC 621.882
• 组合件用锥形锁紧垫圈 Lountersunk external toothed lock washer for assembly
GB/T 9074.28-88 | UDC 621.882
• 腰状杆螺柱连接副型式分类 Connections with waisted stud-Tape classification
GB/T 13807.1-92
• 腰状杆螺柱连接副螺柱 Connections with waisted stud-Studs
GB/T 13087.2-92
• 腰状杆螺柱连接副螺母、受力套管 Connections with waisted stud-Nuts,extension sleeves
GB/T 13087.3-92
• 栓接结构用大六角头螺栓 螺纹长度按GB/T 3106 C级 8.8和10.9级 Hexagon bolts for high-strength structural bolting with large width across flats(thread lengths according to GB/T 3106)-Product grade C-Property classes 8.8 and 10.9
GB/T 18230.1-2000
• 栓接结构用大六角头螺栓 短螺纹长度 C级 8.8和 10.9级 Hexagon bolts for high-strengthstructural bolting with large width across flats(short thread length)-Product grade C-property classes 8.8 and 10.9
GB/T 18230.2-2000
• 栓接结构用大六角头螺母 B级 8和10级 Hexagon nuts for high-strength structural bliting with large width across flats-Product grade B-Property classes 8 and 10
GB/T 18230.3-2000
• 栓接结构用1型大六角螺母 B级 10级 Hexagon nuts for structural bolting with large width across flats,style 1-Product grade B-Property class 10
GB/T 18230.4-2000
• 栓接结构用平垫圈 淬火并回火 Plain washers for high-strength structural bolting hardened and tempered
GB/T 18230.5-2000
• 栓接结构用1型大六角螺母浸热 镀锌(加大攻丝尺寸) A和B级 5.6和8级 Hexagon nuts for structural bolting,style 1,hot-dip galvanized(oversize tapped)-Product grade A and B-Property classes 5.6 and 8
GB/T 18230.6-2000
• 栓接结构用2型大六角螺母浸热 镀锌(加大攻丝尺寸) A级 9级 Hexagon nuts for structural bolting,style 2,hot-dip galvanized(oversize tapped)-Product grade A -Property class 9
GB/T 18230.7-2000
焊钉
• 无头焊钉 Headless studs for stud welding
GB/T 10432-89
• 电弧螺柱焊用圆柱头焊钉 Cheese head studs for arc stud welding
GB/T 10433-2002 | 代替GB/T 10433-1989
上一篇：没有了
下一篇：化工基础
下一篇：化工基础